陈曦明，刘龙.柴油微喷喷雾的CFD建模研究[J].内燃机工程,2018,39(4):73-79.
柴油微喷喷雾的CFD建模研究
Study on Spray CFD Modelling of Diesel Micro Injection
DOI：10.13949/j.cnki.nrjgc.2018.04.012
关键词:柴油微喷  CFD仿真  建模研究  破碎模型  参数优化
Key Words:diesel micro injection spray  CFD simulation  modeling research  breakup model  parameter optimization
基金项目:国家自然科学基金重点项目（51509051）
作者单位
陈曦明，刘龙 哈尔滨工程大学 动力与能源工程学院，哈尔滨 150000 
摘要点击次数: 2923
全文下载次数: 1648
摘要:对微量喷射条件下的柴油喷雾进行了CFD建模仿真，重点对柴油微量喷射的破碎模型进行参数优化研究，并获得了破碎模型参数优化的规律：相比于传统喷射的CFD仿真，微喷喷雾CFD仿真的一次破碎和二次破碎模型对应的尺寸和时间参数均应适当减小,并且根据贯穿距曲线的拐点位置可对一次和二次破碎模型的时间与尺寸参数进行调整，从而能够准确地对不同喷油量下柴油微喷喷雾的发展过程进行数值仿真。
Abstract:The spray of micro injection was simulated by CFD. Meanwhile, parameter optimization of a spray breakup model for diesel micro injection spray was mainly studied, and the parameter optimization law of the spray breakup model was obtained. Compared with the CFD simulation of traditional spray, the size and time parameters of first and second breakup models for micro spray CFD simulation should be decreased, and the adjustments of time and size parameters for first and second breakup models are based on the inflection point of penetration curve, which could be used for accurate numerical simulation of diesel micro injection spray in the conditions of different injection quantity.
查看全文  HTML   查看/发表评论