唐俊,余永华,王勤鹏,杨建国.船用中速柴油机缸压闭环控制技术仿真研究[J].内燃机工程,2019,40(1):72-78.
船用中速柴油机缸压闭环控制技术仿真研究
Simulation and Analysis of Closed-Loop Control Technology for Medium Speed Marine Diesel Engines Based on In-Cylinder Pressure
DOI:10.13949/j.cnki.nrjgc.2019.01.011
关键词:船用中速柴油机  闭环控制  缸压  实时模型
Key Words:medium speed marine diesel engine  closed-loop control  in-cylinder pressure  real-time model
基金项目:船用低速机工程(一期)研制项目(船工科【2015】510号);设备运行与维护智能系统开发项目(工信部联装函【2016】544号)
作者单位
唐俊,余永华,王勤鹏,杨建国 1.武汉理工大学 能源与动力工程学院武汉 430063 2.武汉理工大学 船舶动力工程技术交通行业重点实验室武汉 430063 
摘要点击次数: 3394
全文下载次数: 1759
摘要:针对船用柴油机工作不均匀及循环波动对柴油机性能和振动噪声的负面影响问题,以6L16/24-CR型船用中速柴油机为对象,使用软件在环仿真技术对缸压闭环控制策略进行仿真分析。建立能模拟各缸不均匀性和循环波动的柴油机实时模型,从气缸压力中选取能指示柴油机各缸燃烧状态的反馈变量,根据反馈变量和控制变量之间的动态关系开发缸压闭环控制策略,建立由柴油机实时模型、气缸压力反馈变量、控制策略和喷油控制变量构成的软件在环仿真平台,在该软件在环仿真平台上对缸压闭环控制策略进行闭环仿真。结果表明,开发的缸压闭环控制策略能满足船用柴油机的控制要求,在仿真环境下能改善约99%的各缸不均匀。
Abstract:To eliminate the negative effects of cylinder-to-cylinder unevenness and cycle-to-cycle variation of marine diesel engine on engine performance, vibration and noise, taking a 6L16/24-CR type medium speed marine diesel engine as the research object, an in-cylinder pressure based closed-loop combustion control strategy was investigated with the software-in-loop simulation technology. First, an engine real-time model was established and verified, which was capable of simulating the inhomogeneity of all cylinders and cycle-to-cycle variation. The feedback variables that could indicate the combustion state of each cylinder were extracted from in-cylinder pressure, and a closed-loop combustion control strategy was developed based on the dynamic interaction between the combustion control variables and feedback variables. Next, a software-in-loop simulation platform was built on the base of the engine real-time model, feedback variables, combustion control strategy and fuel injection control variables. Finally, the simulation of the closed-loop combustion control strategy based on in-cylinder pressure was conducted on the platform. The results show that the developed closed loop combustion control strategy based on in-cylinder pressure can meet the combustion control requirements of marine engines, and about 99% of cylinder-to-cylinder unevenness is restrained in the simulation environment.
查看全文  HTML   查看/发表评论