张东剑,马其华,张璐璐,任洪娟, 闫业翠.柴油机Urea-SCR系统内流场与化学反应耦合研究[J].内燃机工程,2018,39(6):59-66.
柴油机Urea-SCR系统内流场与化学反应耦合研究
Coupling Research of Flow Field and Chemical Reaction in a Diesel Urea-SCR System
DOI:10.13949/j.cnki.nrjgc.2018.06.008
关键词:柴油机  选择性催化还原  流速均匀性系数  NOx转化效率
Key Words:diesel engine  SCR  velocity uniformity coefficient  NOx conversion efficiency
基金项目:2018年度中央高校基本科研业务费学科交叉(理工科)重点计划项目
作者单位
张东剑,马其华,张璐璐,任洪娟, 闫业翠 1.上海工程技术大学 汽车工程学院上海 2016202.东华大学 高性能纤维及制品教育部重点实验室上海 2016203.东华大学 纺织面料技术教育部重点实验室上海 201620 
摘要点击次数: 2903
全文下载次数: 1647
摘要:提出三维流场与一维化学反应相耦合的方法对柴油机尿素(urea)-选择性催化还原(SCR)系统进行全尺寸模拟,真实反映SCR系统内部气流运动状态对化学反应的影响。选择柴油机典型工况的排气温度、流量及压力等物理信息作为边界条件,对SCR系统进行流场分析,截取催化器前端截面的速度切片,建立流速均匀性系数与工况的函数模型,研究各流速分布下运行参数对NOx转化效率及副产物N2O生成的影响,为优化SCR系统控制策略提供指导。结果表明,不同工况下柴油机SCR催化器前端各区域流速差异明显,且流速均匀性系数在0.6~0.8区间内,氨氮比为1.1且NO2、NOx之比在0.0~0.5区间内时,NOx转化效率最高,副产物N2O的生成最少
Abstract:A method of coupling a three dimensional flow field with an one dimensional chemical method was proposed to perform a full-scale simulation of a diesel engine selective catalytic reduction(SCR) system to study the effect of flow uniformity distribution on catalytic reduction reaction. Using the exhaust information measured by the engine bench test, a SCR three-dimensional flow field simulation was conducted to study the flow velocity changes at the front cross section of the SCR catalytic converter under different operating conditions, and then the effect of the operating parameters on NOx conversion efficiency and by-product N2O formation was investigated under various flow rate distributions in order to provide a guidance for optimizing the control strategy of the SCR system. Results show that the difference in flow rates between the various regions of the front end of the SCR catalytic converter is obvious under different operating conditions. When the flow rate uniformity coefficient is within the range of 0.6 to 0.8, NH3/NOx is 1.1 and NO2/NOx is between 0.0 and 0.5, the NOx conversion efficiency is the highest, while the formation of by-product N2O is the lowest.
查看全文  HTML   查看/发表评论