吴坚,陈嘉雯,杜家坤,等.主动预燃室式直喷汽油机稀薄燃烧性能研究[J].内燃机工程,2021,42(3):55-60.
The Lean Combustion and Emission Performance of a GasolineDirect Injection Engine with Active Pre-chamber
DOI:10.13949/j.cnki.nrjgc.2021.03.008
Key Words:lean burn  pre-chamber  jet flame ignition  gasoline performance  gasoline emission
Author NameAffiliationE-mail
Wu Jian GAC Automotive Research Development Center,Guangzhou,511434 j.wu@gacrnd.com 
Chen Jiawen GAC Automotive Research Development Center,Guangzhou,511434  
Du Jiakun GAC Automotive Research Development Center,Guangzhou,511434 dujiakun@gacrnd.com 
Chen Hong GAC Automotive Research Development Center,Guangzhou,511434  
Li Yuhuai GAC Automotive Research Development Center,Guangzhou,511434  
Zhan Wenfeng GAC Automotive Research Development Center,Guangzhou,511434  
摘要点击次数: 3338
全文下载次数: 1325
Abstract:In order to clarify the effect of ignition system on lean burn characteristics, experiment have been done with conventional spark plug ignition and active pre-chamber on a 0.5L Single Cylinder Research Engine (SCRE). The ways how to extend the lean burn limitation also have been investigated. The results show that, lean burn combustion can effectively reduce the fuel consumption and increase the thermal efficiency of gasoline engine. Adopting traditional spark plug system can extend the lean burn limit to excess air ratio of 1.5 with the gross indicated thermal efficiency of 45% limited by unstable combustion, while resembling active pre-chamber system can achieve GITE of 46.5% with the excess air ratio of 2.0 with the help of much more stable combustion. And the NOx emission of active-prechamber system has been reduced by 88% compared by conventional spark plug system. Increasing the compression ratio to 15 can further increase the GITE to 48% and reduce the NOx emission to lowest 58×10-6 (v/v) with the excess air ratio of 2.1.
查看全文  查看/发表评论  下载PDF阅读器