| 朱瑞，汪洋，耿鹤鸣，董翔宇，王明博，甄旭东.低回油高压共轨喷油器方案优化[J].内燃机工程,2021,42(2):82-88. |
| Optimization of High-Pressure Common Rail Injector with Low-Return Fuel |
| DOI：10.13949/j.cnki.nrjgc.2021.02.011 |
| Key Words:high-pressure common rail injector dynamic response returned fuel AMESim |
| Author Name | Affiliation | | HU Rui, WANG Yang, GENG Heming, DONG Xiangyu, WANG Mingbo, ZHEN Xudong | 1. State Key Laboratory of Engines, Tianjin University, Tianjin 300072, China
2. School of Auto Mobileand Transportation, Tianjin University of Technology and Education, Tianjin 300222, China |
|
| 摘要点击次数: 3004 |
| 全文下载次数: 1116 |
| Abstract:A scheme of high-pressure common rail injectors with low-return fuel was proposed by changing the control plunger structure in order to reduce the pressure of the control chamber connected to the fuel return orifice to reduce the quantity of returned fuel. The key structural parameters of the new scheme was optimized with one-dimensional simulation tool AMESim. Results show that the delay of closing the needle valve decreases with the decrease of the diameter of the seal ring, but too small diameter of the seal ring will cause the needle valve to continuously jump, resulting in the pulsation of the injection rate and weakening the effect of reducing the quantity of returned fuel. The quantity of returned fuel decreases with the decrease of the diameter of the orifice, but too small diameter will deteriorate the closing response. The new scheme was simulated under different common rail pressures. Compared with original high pressure common rail injectors, the quantity of returned fuel of the new scheme reduces significantly by up to more than 41% and the characteristic of closing response is not affected, which proves that the proposed scheme is effective. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|