• 首页
  • 期刊简介
  • 编委会
  • 投稿须知
  • 审稿指南

    • 石智成，吴晗，李海鹰，刘福水.重型柴油机低温环境喷雾及蒸发特性研究[J].内燃机工程,2020,41(5):1-8.
    Spray and Evaporation Characteristics of Heavy Duty Diesel Engines at Low Temperatures
    DOI：10.13949/j.cnki.nrjgc.2020.05.001
    Key Words:heavy duty diesel engine  low temperature  nozzle diameter  ambient temperature  spray
    Author NameAffiliation
    SHI Zhicheng, WU Han, LI Haiying, LIU Fushui 1.School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China
     2.China North Engine Research Institute, Tianjin 300400, China 
    摘要点击次数: 3327
    全文下载次数: 1516
    Abstract:The effects of nozzle diameter (0.12~0.32mm) and ambient temperature (550~850K) on the spray characteristics of heavy duty diesel engines were measured visually in a constant volume combustion chamber using the Mie scattering and shadowgraph methods. The results showed that, different from the light duty diesel engines, the liquid phase fuel of the heavy duty diesel engines with the 0.32mm nozzle still penetrated continuously and failed to reach a quasi steady state when the ambient temperature was increased to 750K at various injection pressures and ambient pressures, or when reaching a quasi steady state, the penetration distance was too long, leading to spray impingement. With the increase of the ambient temperature, the adhesion amount of liquid spray with the 0.32mm nozzle decreased. Only when the evaporation of fuel was strong enough at the ambient temperature of 850K, could the height and radius of impingement spray reach a quasi steady state.
    查看全文  查看/发表评论  下载PDF阅读器