| 杨坤，孙凯，鲁祯，王天友，王怀印.多喷油器分段喷射对大缸径低速柴油机燃烧及排放的影响[J].内燃机工程,2020,41(3):27-34. |
| Influence of Split Injection on Combustion and Emissions of Large-Bore Low-Speed Diesel Engine with Multiple Injectors |
| DOI：10.13949/j.cnki.nrjgc.2020.03.004 |
| Key Words:two-stroke marine engines exhaust gas recirculation multiple injection injection angle emission |
|
| 摘要点击次数: 4226 |
| 全文下载次数: 1779 |
| Abstract:To address the issue of a large two-stroke marine diesel engine having higher fuel consumption due to adopting the exhaust gas recirculation (EGR) to meet the Tier Ⅲ emissions regulations, the influence of split injection and injection angle on the fuel-air mixture, combustion and emissions were studied by using three dimensional numerical simulation based on the single cylinder model of such engine with multiple injectors. The results show that 30% of EGR rate can meet Tier Ⅲ, and the injection angle directly determines the formation of fuel-air mixture in the cylinder. If the injection angle is too small, the tips of fuel sprays of the injectors overlaps in the central cylinder and forms local rich region, leading to insufficient utilization of the in-cylinder air. If the injection angle is overlarge, fuel sprays and flames collids on the cylinder wall and hence results in increased heat loss through the wall. With a moderate fuel injection angle of 20°, in contrast, optimal mixing and heat release can be achieved with improved power output and reduced fuel consumption. In the presence of EGR, synergistically optimizing split injection and injection angle can reduce NOx by 65.5% with fuel consumption increasing only by 1.24% when using 30% of EGR rate, 10.0% of fuel fraction in pilot injection, 15° of interval between pilot and main injections and 20° of injection angle. Adopting three-time injection can effectively improve the compromise between fuel consumption and NOx emissions, but with a small room for a further optimization. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|