施东晓,郭立新,李康宁,姚春德,杨海涛.进气管结构对天然气发动机废气再循环率均匀性的影响[J].内燃机工程,2020,41(3):42-48. |
Effect of Intake Pipe Structure on Exhaust Gas Recirculation Uniformity of Natural Gas Engine |
DOI:10.13949/j.cnki.nrjgc.2020.03.006 |
Key Words:natural gas engine exhaust gas recirculation (EGR) numerical simulation uniformity |
|
摘要点击次数: 4001 |
全文下载次数: 1871 |
Abstract:In order to solve the issue of excessive difference in combustion consistence among the cylinders of a China Ⅵ natural gas engine, an analysis of the exhaust gas recirculation(EGR) rate uniformity of the intake system was carried out by a computational fluid dynamics(CFD) software called STAR-CCM+. It was found that the EGR rates of from No.1 to No.3 cylinders were larger than those of from No.4 to No.6 cylinders, and the relative deviation of EGR rate at 1200r/min with full load was from -29.9% to 34.2%. The analysis showed that there was a large fluctuation at the EGR inlet due to EGR being extracted only from No.1 to No.3 cylinders, which mainly caused the uneven distribution of EGR rate among the cylinders. Two optimizations of intake pipe were put forward to reduce the fluctuation of EGR in the intake pipe. By using the two kinds of optimized intake pipe, the recirculated exhaust is fully mixed before entering the intake manifold, which improves the uniformity of EGR rate in each cylinder obviously and brings the relative deviation of EGR rate to within ±5%. |
查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|