| 周昕毅，李铁，王宁.柴油蒸发喷雾瞬态液相贯穿距模型及试验验证[J].内燃机工程,2020,41(2):8-14. |
| Modeling and Experimental Verification of Transient Liquid Penetration of Diesel Evaporating Spray |
| DOI：10.13949/j.cnki.nrjgc.2020.02.002 |
| Key Words:diesel engine evaporating spray liquid penetration model initial stage of injection constant volume combustion vessel |
|
| 摘要点击次数: 4825 |
| 全文下载次数: 1961 |
| Abstract:Considering the fuel pressure building process inside the nozzle sac, a model suitable for the liquid penetration at the initial stage of fuel injection was derived. Then, in the high-temperature and high-pressure environment near the top dead center of a diesel engine built in a constant volume combustion vessel, the effects of the injection pressure, ambient temperature and density on the development process of evaporating spray liquid penetration were tested by using diffused back-illumination method, and compared with the simulation calculation. Results show that at the initial stage of fuel injection, the liquid penetration does not change linearly with the time of t as predicted by Hiroyasu model, but first presents an acceleration process that varies with the time of t1.5 and then changes with the time of t0.75 and t0.5, respectively, due to the spray breakage and fuel pressure built up in the nozzle sac. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|