| 刘敏江,汪洋,耿鹤鸣,李智勇,甄旭东.多点点火对高强化液压自由活塞发动机燃烧过程影响的仿真研究[J].内燃机工程,2019,40(6):71-77. |
| Simulation Study on the Influence of Multi-Point Ignition on Combustion Process of an Intensified Hydraulic Free Piston Engine |
| DOI：10.13949/j.cnki.nrjgc.2019.06.011 |
| Key Words:hydraulic free piston engine(HFPE) supercharged multi-point ignition knocking indicated thermal efficiency |
| Author Name | Affiliation | | LIU Minjiang,WANG Yang,GENG Heming,LI Zhiyong,ZHEN Xudong | 1.State Key Laboratory of Engines, Tianjin University, Tianjin 300072, China
2.School of Automobile and Transportation, Tianjin University of Technology and Education, Tianjin 300222, China |
|
| 摘要点击次数: 3175 |
| 全文下载次数: 1778 |
| Abstract:A three-dimensional simulation model of an ignited hydraulic free piston engine(HFPE) was established by using a CONVERGE simulation platform. The pressure acting on the top surface of piston was solved in real time to promote the coupling of the combustion gas force in the cylinder with the hydraulic pressure. On this basis, the indicated thermal efficiency and knocking conditions of the pressurized multi-point ignition HFPE were also studied. Results show that the use of multi-point ignition improves the indicated thermal efficiency of the pressurized HFPE, which results in a smaller compression ratio for the best indicated thermal efficiency and a higher indicated thermal efficiency at a higher boost ratio. Use of multi-point ignition also expands the boost ratio in the high efficiency zone to over 4. Moreover, an appropriate increase in the mass of piston assembly can extend the residence time of the piston near the top dead center, thus further improving the indicated thermal efficiency. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|