魏子清,高文志,吴坚,宋启新,陆逍.断油回流停缸策略对发动机油耗及轴系扭振的影响[J].内燃机工程,2019,40(3):94-101.
Effect of Cylinder Deactivation with Waste Gas Return Scheme on Engine Fuel Consumption and Torsional Vibration
DOI:10.13949/j.cnki.nrjgc.2019.03.013
Key Words:gasoline engine  crankshaft train  cylinder deactivation device   torsional vibration characteristic
Author NameAffiliation
WEI Ziqing, GAO Wenzhi, WU Jian, SONG Qixin, LU Xiao 1.State Key Laboratory of Engines Tianjin University Tianjin 300072, China  2.Automotive Engineering Institute, Guangzhou Automobile Group Co., Ltd., Guangzhou 511434, China 
摘要点击次数: 3926
全文下载次数: 1796
Abstract:An engine cylinder deactivation device based on waste gas return scheme was designed for a 1.5 L natural aspiration engine. The device can make the intake system switch freely between fresh mixture and high temperature exhaust gas. Simultaneously the electronic control unit(ECU) can shut off fuel supply system and stop the ignition of the deactivated cylinder, so as to make the cylinder stop operation. With the cylinder deactivation device, engine fuel consumption and torsional vibration at low and medium speeds with different loads were experimentally investigated. The test results indicate that the cylinder deactivation technology can obviously save fuel at low and medium speeds with partial load, with fuel saving by up to 15%. However, cylinder deactivation can cause a significant increase in crankshaft torsional vibration with low order rolling vibration in dominance. And the torsional vibration at the flywheel end is remarkable, with the amplitudes of some orders being greater than those at the free end. Therefore, the torsional vibration of the flywheel end should be considered when applying the engine cylinder deactivation technology.
查看全文  查看/发表评论  下载PDF阅读器