| 周庆哲，张玉银，齐文元.影响Zeuch法喷油速率测量精度的关键因素研究[J].内燃机工程,2019,40(1):28-35. |
| Investigation on the Key Factors Affecting the Accuracy of Fuel Injection Rate Measurement by Zeuch Method |
| DOI：10.13949/j.cnki.nrjgc.2019.01.005 |
| Key Words:injection rate gasoline engine Zeuch's method air content container stiffness |
|
| 摘要点击次数: 4078 |
| 全文下载次数: 2129 |
| Abstract:In order to improve the measurement accuracy of the injection rate of gasoline direct injection injectors, an injection rate measurement system was developed based on the principle of Zeuch method ;and a bench test and simulation calculation were performed on the stiffness of constant volume container, and air content in the measuring chamber that mainly affect the measurement accuracy. Results show that under the same injection conditions, the volumetric expansion of a low stiffness container is greater than that of a high stiffness container, so that the measured injection rate curve is relatively low, resulting in a decrease in measurement accuracy. When the air content in the measuring chamber is large, the increment of the pressure in the chamber decreases linearly, so that the amplitude of the pressure fluctuation increases and the freguency of the fluctuation decreases, resulting in a lower injection rate than the actual value coupled to the increase in fluctuation. Based on the research results, the revised and optimized fuel injection rate measurement system greatly improves the measurement accuracy and has high repeatability. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|