| 孟忠伟，陈超，秦源，晋兆祥，王刚，方嘉.载体材料对DPF再生性能影响的试验研究[J].内燃机工程,2018,39(3):53-57. |
| An Experimental Study of Substrate Materials on Regeneration Performance of DPF |
| DOI：10.13949/j.cnki.nrjgc.2018.03.008 |
| Key Words:diesel particulate filter(DPF) material regeneration temperature temperature gradient regeneration efficiency filter pressure drop |
| Author Name | Affiliation | | MENG Zhongwei,CHEN Chao,QIN Yuan,JIN Zhaoxiang,WANG Gang,FANG Jia | 1.Sichuan Collaborative Innovation Center for Automotive Key Components, School of Automobile and Transportation, Xihua University, Chengdu 610039, China
2.Key Laboratory of Fluid and Power Machinery(Xihua University), Ministry of Education, Chengdu 610039, China
3.Wuxi Weifu Environmental Catalysts Co., Ltd., Wuxi 214028, China |
|
| 摘要点击次数: 4589 |
| 全文下载次数: 1952 |
| Abstract:The influence of the aluminum titanate(AT) and silicon carbide(SiC) substrate materials on regeneration performance of DPF and CDPF was investigated on a regeneration test bench with additional heating sources. Results indicate that the maximum temperature and maximum temperature gradient for different substrate materials of DPF and CDPF increase slowly first and then increase rapidly with the rise of regeneration temperature. The rapid increase of regeneration temperature can't directly lead to an improvement on regeneration efficiency. The maximum temperature and maximum temperature gradient of AT are much higher than that of SiC, when the rapid regeneration of soot. The pressure drop increases with the rise of regeneration temperature and soot loading, which is related to the porosity, pore diameter, and structure of the substrate. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|