| 章健，刘世英，李辉，熊培友，陈延鹏.活塞结构刚度对动力学性能影响的研究[J].内燃机工程,2017,38(2):84-90. |
| Effect of Structure Stiffness of Piston to Dynamical Performance |
| DOI： |
| Key Words:IC engine stiffness dynamics secondary movement kinetic energy in knocking |
|
| 摘要点击次数: 3425 |
| 全文下载次数: 2108 |
| Abstract:In order to determine the stiffness distribution of a piston, a matrix was used to describe the piston radial stiffness, and a bench test was made to measure the piston deformations at specified points when loading was made at different positions. The effect of stiffness change on the secondary motion, kinetic energy in knocking and friction loss was analyzed by simulation. In order to ensure the accuracy of boundary conditions such as piston temperature field, thermal piston deformation and installed liner deformation, the simulation process was calibrated and validated by the measured data obtained with the hardness plug temperature test and liner profiler. The results show that a dynamic analysis must include the influence of liner stiffness and piston stiffness, otherwise the piston tilting angle from the simulation will be smaller and the friction loss will be larger than their actual values, and the kinetic energy in knocking will generate cyclical deviations at different crank angles, some deviations may even reach 70%; that the piston stiffness will change with the structure, and usually if the stiffness of skirt is increased, the maximum tilting angle at each turning point will become smaller and so will be the peak kinetic energy at each knocking point. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|