• 首页
  • 期刊简介
  • 编委会
  • 投稿须知
  • 审稿指南

    • 方成，杨福源，欧阳明高，高庆文，白思春.利用以太网的柴油机燃烧分析与控制方法研究[J].内燃机工程,2017,38(2):19-23.
    Study on Combustion Analysis and Control with Ethernet Communication for Diesel Engine
    DOI：
    Key Words:IC engine  Ethernet  combustion analysis  user datagram protocol  combustion indexes  closed loop combustion control
    Author NameAffiliation
    FANG Cheng，YANG Fuyuan，OUYANG Minggao，GAO Qingwen，BAI Sichun 1.State Key Laboratory of Automotive Safety and Energy，Tsinghua University，Beijing 100084，China
    2.Engine Co.，Ltd.， Wuhu 241080，China
    3.China North Engine Research Institute，Tianjin 300400， China 
    摘要点击次数: 3072
    全文下载次数: 2117
    Abstract:A diesel engine combustion analysis and control system based on a developed combustion analysis tool and with the Ethernet communication was established. Real time cylinder pressure information was acquired every 0.2 crankshaft angle and sent via the Ethernet of user datagram protocol（UDP） to a combustion analysis and control software， by which combustion indexes were calculated and sent to the engine control unit（ECU） in which closed loop combustion control was applied with these combustion indexes. A verification test made on a 1.9 L diesel engine demonstrates that this combustion analysis and control system successfully acquires real time cylinder pressure information， provides combustion indexes， and has the ability to control engine combustion.
    查看全文  查看/发表评论  下载PDF阅读器