| 张小兵，刘海江，何燕妮，汤达.基于高精度测量的内燃机缸盖结合面密封路径的密封性能分析[J].内燃机工程,2017,38(2):146-150. |
| nalysis of Sealing Performance Analysis of Sealing Path on the Matched Surfaces of Cylinder Head Based on High Definition Metrology |
| DOI： |
| Key Words:IC engine Gaussian filter approximating spline morphological filter Motif combination gasket sealing performance |
|
| 摘要点击次数: 2934 |
| 全文下载次数: 2075 |
| Abstract:Based on the precise measurement data of combustion engine matched surfaces of cylinder block and head obtained from Shapix surface detective， sealing performance is evaluated. Firstly， a sealing path along the cylinder port on the cylinder head surface binding was determined， and coordinate values along the path were obtained. Secondly， Gaussian filter based on approximating spline was used to obtain the surface profile after fitting along the sealing path. Thirdly， based on Motif combined morphological filtering， the surface texture of gasket along the sealing path after assembly was achieved. Finally， the sealing performance of the sealing path was determined by calculating the void area between the gasket and cylinder head. The result shows：the use of Gaussian filter based on approximating spline not only gains similar surface profile as Gaussian filter but also restrains the end distortion； using surface profile measurements can not only evaluate engine's cylinder head sealing performance but also determine the leaking location. |
| 查看全文 查看/发表评论 下载PDF阅读器 |